Install new indoor air handler as follows
Remove and dispose of the existing indoor air handler
Install a new indoor 15.2-Seer2 single-speed heat pump air handler
Install a new drain pan if needed
Blow out the existing drain line and reconnect
Ensure the new system is level and secure
Transition the supply side and return air side plenums to the air handler
Apply an airtight seal to the plenums and air handler
Install new safety switches
Replace the existing electrical disconnect
Install a new basic thermostat

Install new outdoor condenser as follows:
Remove and dispose of the existing outdoor AC unit
Install a new single-speed electric 15.2-Seer2 outdoor heat pump AC unit
Replace the existing condenser pad if needed
Replace the existing electrical disconnect
Acid-flushed the existing line set to remove contaminants and reconnect
Install a new drier filter to protect against potential future contaminants
Install locking caps on the freon valves to eliminate tampering
Commission the system and calibrate to the manufacturer’s specs

Includes
Run heat load calculations pre-install to verify proper sizing
Register the new equipment in the owner’s name to protect the factory parts warranty
Perform city permitting and city inspection if required
Start rebate paperwork for the homeowner to finalize and turn into the utility company

Labor Warranty
10-Year Amana Factory warranty on parts
2-Year warranty on labor
Addition 5 & 10-year labor warranties at additional cost